At some point in life, you must have shaken and stirred yourself whilst contemplating how to fix your metal door blinds since the mere idea of drilling into it is quite dreadful. Perhaps you are concerned with having a poor painting job and spoiling the next section of the door, or maybe you are living in a rental house, and drilling is prohibited. However, whether your reasons are good or ‘otherwise,’ it is good news for you! Picking up a drill is not the only option one can take to fix blinds on a metal door there are other effective methods as well.
Why Install Blinds on Metal Doors without Drilling?
Although metal doors can provide security and relatively long service, the choice of materials and design can be a problem concerning aesthetics and privacy; in this case, the use of blinds does help. The problem? Working with metal doors is not such a fun experience, especially if you do not want to create more permanent methods. Twisting, boring, and scraping into metal not only weaken the door structure but can affect the warranties, or even destroy paint layers.
The Problem with Drilling Metal Doors
Metal is hard to drill through. Not only would it need appropriate tools, but one slip and you wind up with a nasty, permanent hole or scratch that can never again be removed. Most metals are protected by some sort of a coat, drilling gets rid of this layer, and the metal rusts. And if you’re renting, for instance, the harm you inflict can lead to losing your security deposit.
Alternative Methods to Install Blinds
No-drill methods are a lifesaver and the good news is that available options do not raise issues with stability or style. Adhesive mounting strips to magnetic blinds, there is a product for use on metal doors. There are also tension rods that enable blinds to be hung safely on the wall without causing any stains on the walls. Let’s dissect these options!
Tools and Materials You’ll Need
The advantage of no-drill blind installation is that the materials used are easily accessible and easy to affix. Here’s what to gather:
- Adhesive Mounting Strips
These strips are a lifesaver. They can easily grip blinds and won’t scratch the door while pulling down the blinds. Select uniquely strong strips of high bonding capacity capable of holding the large items, and ensure they are referred to as removable or damage-free.
- Magnetic Blinds
Easy-to-install magnetic blinds are designed to be mounted on metal doors. The magnets are strong enough to hold the panels in place and at the same time they are easy to remove with ease.
- Tension Rods
Another wonderful idea is to use tension rods. These rods are attached to place through pressure, hence ideal for suspending most light blinds or curtains. All you have to do is position the rod to the width of the window of your door and you are ready to go.
Step-by-Step Guide to Installing Blinds Without Drilling
Let’s go with how to put blinds up on your metal door without using a drill.
Step 1 – Measure Your Door
Measuring is key! First, you need to know the dimensions of your door window and in this, you need to measure the width of your window and its height. This will help you make sure that the blinds that you are going to purchase are fit for your window.
Step 2 – Choose the Right Blinds
It is mentioned that all blinds are not the same. While some blinds are compact and easily installed on tension rods, others come with the necessity of a magnetic connection. Choose blinds that can fit the installation mode that you want to use.
Step 3 – Prepare Your Surface
When you are ready to start installing then you must prepare the door and clean it. Contamination by dirt or grease may cause the adhesive strips or magnets to lose their effectiveness and therefore the blinds are not well held.
Step 4 – Use Adhesive Mounting Strips
If you’re using adhesive strips, a backing should be removed, and the strips can then be fixed on the door frame or window casing. Press it firmly for about 30 seconds so that it can stick well. Then, fix the blinds to the strips using small screws.
Step 5 – Install Magnetic Blinds
In the case of magnetic blinds, one only needs to fix the blind somehow, and then the magnets will take over the work. Ensure that the blinds are well placed to fit the door’s window.
Step 6 – Fit the Blinds with Tension Rods
Slide the rod up to the width of the door’s window and place the rod gently on the narrow sides of the window frame. After that place your blinds on the rod and then arrange them to fit the correct position properly.